Everyone
likes to enjoy their free time in a more effective way. It would be
more interesting and joyful if we spend the time in playing games,
solving puzzles etc. Touch me not is an interesting project that allows
the user to upgrade his concentration and a relief providing game.
This
project is mainly designed as Events to be conducted at Exhibitions,
Fetes etc. This project seems to be easy but it includes different
interfacings with the microcontroller. This project uses 8051
microcontroller. LCD display is provided in this project for the display
of various parameters like chances, time etc.
In
this project, the user will be provided with a maximum of five chances
and a time limit up to 180 seconds to play the game. The operator sets
the chances and time using switches. LEDs are used in this project to
indicate the number of chances selected. Three switches are used to set
the chances, time and start the game. LCD display is used to display the
numbers i.e., chances, entered time and current time.
Once
the chances and time are set, the operator presses the enter switch to
start the game. Once the game is started, the time starts decreasing and
the user has to play the game within the given time. The game is to
move the iron rod from one end of the rope to the other end without
touching the rope. If the rod touches the rope, the chances will be
decremented by one and the game continues until the time is completed or
the chances are equal to zero.
After the game is completed, the operator can press the enter switch
once again for the next participant to play the game with the same
settings i.e.; time and chance values set previously or can press the
reset switch to start with the new settings.